Hands-on 4 Storing Hits

l Introduction

l Installation

l Calorimeter Geometry Implementation

l Sensitive Detector and Hit Definition

l User Defined Event Action Class

l Hit Visualisation

Important:

Every time you open a new shell you need to set your environment up correctly.

Introduction

By the end of this Hands-on you should be able to:

l Define a simple Cesium Iodide calorimeter

l Define a sensitive detector and create and update hit collections

l Implement a user defined event action class

l Visualise hits

This exercise builds on the HandsOn2 exercise. It is based on an experimental setup developed for bremsstrahlung benchmarking at UCSF. The simplified experiment is made up of the following components:

l Vacuum beam pipe

l Titanium beam window

l Iron evacuation chamber window

l Silicon monitor

l Beryllium target

Electrons are generated with a default energy of 15 MeV in the beam pipe. The electrons interact with the target and generate bremsstrahlung photons. A square Cesium Iodide calorimeter, segmented into 100 5cm*5cm*25cm cells is also implemented. The diagram below demonstrates the simulated experiment.

The following files are provided with the exercise:

l beamTest.cc - main program

l BeamTestDetectorConstruction – material, geometry and sensitive detector definitions

l BeamTestPrimaryGeneratorAction - primary particle generator

l BeamTestPhysicsList - user defined physics list

l BeamTestEventAction - G4UserEventAction class

l BeamTestCellParameterisation – calorimeter cell parameterisation

l BeamTestEmCalorimeter – sensitive detector for the calorimeter

l BeamTestEmCalorimeterHit – calorimeter hit

l BeamTestSiliconMonitor – sensitive detector for silicon monitor

l BeamTestSiliconMonitorHit – silicon monitor hit

All the geometries except for the calorimeter are implemented. The calorimeter geometry, sensitive detector and hits are implemented over the course of the exercise.

Installation

If using windows, make sure G4UI_USE_TCSH is not set.

To start this exercise, unpack HandsOn4.tgz to your working directory.

Compile and link it using following commands:

$ cd HandsOn4

$ make

Once you have successfully compiled and linked the code, try it to see how it runs:

$ ./bin/$G4SYSTEM/beamTest run.mac

This will produce files named G4Data0.heprep and G4Data1.heprep, which can be viewed by invoking the HepRApp visualization tool.

$ java –jar HepRApp.jar G4Data0.heprep

You should be able to view the following:

You can see that all the components with the exception of the calorimeter have been implemented.

Calorimeter Geometry Implementation

The calorimeter mother volume is defined as an air filled box with dimensions 0.5m*0.5m* 0.25m. It is placed along the z axis at a distance of 0.5m from the centre of the world volume. One hundred cells are placed within the mother volume. The cells are constructed of CsI, with dimensions 5cm*5cm*25cm. G4PVPlacement is used to construct the mother volume, while G4PVParameterised, with the parameterisation provided by BeamTestCellParameterisation, is used to construct the CsI crystals.

The implementation, along with visualisation attributes, is shown below.

BeamTestDetectorConstruction.cc

----- snipped -----

// HandsOn4: Create CsI calorimeter

#include "BeamTestCellParameterisation.hh"

#include "BeamTestEmCalorimeter.hh"

#include "BeamTestSiliconMonitor.hh"

#include "G4Box.hh"

#include "G4Colour.hh"

----- snipped -----

// Define elements

G4Element* N = new G4Element("Nitrogen", symbol="N", z=7., a=14.01*g/mole);

G4Element* O = new G4Element("Oxygen", symbol="O", z=8., a=16.00*g/mole);

//HandsOn4: Define CsI

G4Element* Cs = new G4Element("Cesium", symbol="Cs", z=55., a=132.9*g/mole);

G4Element* I = new G4Element("Iodine", symbol="I", z=53., a=126.9*g/mole);

// CsI

G4Material* CsI = new G4Material("CsI", density=4.51*g/cm3, ncomponents=2);

CsI->AddElement(I, .5);

CsI->AddElement(Cs, .5);

// Define air

G4Material* air = new G4Material("Air", density= 1.290*mg/cm3, ncomponents=2);

air->AddElement(N, fractionmass=0.7);

air->AddElement(O, fractionmass=0.3);

----- snipped -----

fpWorldPhysical = new G4PVPlacement(0, // Rotation matrix pointer

G4ThreeVector(), // Translation vector

fpWorldLogical, // Logical volume

"World_Physical", // Name

0, // Mother volume

false, // Unused boolean parameter

0); // Copy number

////////////////////////////////////////////////////////////////////////

// HandsOn4: Create CsI calorimeter

// Mother volume

G4VSolid* calorimeterSolid = new G4Box("Calorimeter_Solid", // Name

.5*m, // x half length

.5*m, // y half length

.25*m) ; // z half length

G4LogicalVolume* calorimeterLogical =

new G4LogicalVolume(calorimeterSolid, // Solid

air, // Material

"Calorimeter_Logical"); // Name

new G4PVPlacement(0, // Rotation matrix pointer

G4ThreeVector(0.,0.,0.5*m), // Translation vector

calorimeterLogical, // Logical volume

"Calorimeter_Physical", // Name

fpWorldLogical, // Mother volume

false, // Unused boolean

0); // Copy number

// 100 rectangular CsI cells

G4Material* csi = G4Material::GetMaterial("CsI");

G4VSolid* cellSolid = new G4Box("Cell_Solid", // Name

5*cm, // x half length

5*cm, // y half length

25.*cm); // z half length

G4LogicalVolume* cellLogical

= new G4LogicalVolume(cellSolid, // Solid

csi, // Material

"Cell_Logical"); // Name

G4VPVParameterisation* cellParam = new BeamTestCellParameterisation();

new G4PVParameterised("Cell_Physical", // Name

cellLogical, // Logical volume

calorimeterLogical, // Mother volume

kXAxis, // Axis

100, // Number of replicas

cellParam); // Parameterisation

----- snipped -----

// Invisible world volume.

fpWorldLogical->SetVisAttributes(G4VisAttributes::Invisible);

// HandsOn4: Calorimeter attributes

// Invisible calorimeter mother volume

calorimeterLogical->SetVisAttributes(G4VisAttributes::Invisible);

// Calorimeter cells - green with transparency

G4VisAttributes* calorimeterAttributes =

new G4VisAttributes(G4Colour(0.0, 1.0, 0.0, 0.1));

calorimeterAttributes->SetForceSolid(true);

cellLogical->SetVisAttributes(calorimeterAttributes);

Implement the above and compile, link and run the program. Use HepRApp to check that all the geometries are now in place. The geometry should be visible in G4Data0.heprep, while G4Data1.heprep should also show trajectories.

Sensitive Detector and Hit Definition

We are interested in finding the energy deposited in each CsI cell. To do this we need to:

l Create a sensitive detector (BeamTestEmCalorimeter)

l Generate an associated hit collection to record the energy deposited in each cell

l Register the detector with the sensitive detector manager (G4SDManager)

l Attach the sensitive detector to the parameterised calorimeter cell volume

A hit class, BeamTestEmCalorimeterHit, inheriting from G4VHit, is provided with the example. A partially implemented sensitive detector class, BeamTestEmCalorimeter is also provided. We will start off by completing the BeamTestEmCalorimeter implementation.

On initialisation, BeamTestEmCalorimeter is responsible for creating a new collection of 100 BeamTestEmCalorimeterHit objects. Each BeamTestEmCalorimeterHit object accumulates the energy deposited in one CsI cell. The collection of hits is then registered with the G4HCofThisEvent (hit collection of this event) object. The hit collection data is updated in the ProcessHits(G4Step* aStep) method of BeamTestEmCalorimeter, where the energy deposited for that step is accessed, and the appropriate BeamTestEmCalorimeterHit object updated.

The implementation is shown below.

BeamTestEmCalorimeter.cc

----- snipped -----

#include "G4HCofThisEvent.hh"

// HandsOn4: Hit collection

#include "G4SDManager.hh"

#include "G4Step.hh"

#include "G4TouchableHistory.hh"

#include "G4Track.hh"

----- snipped -----

void BeamTestEmCalorimeter::Initialize(G4HCofThisEvent* hitsCollectionOfThisEvent)

{

// HandsOn4: Creating hit collection

// Create a new collection

fHitsCollection =

new BeamTestEmCalorimeterHitsCollection(SensitiveDetectorName, collectionName[0]);

if(fHitsCollectionID < 0)

fHitsCollectionID = G4SDManager::GetSDMpointer()->GetCollectionID(fHitsCollection);

// Add collection to the event

hitsCollectionOfThisEvent->AddHitsCollection(fHitsCollectionID, fHitsCollection);

// Initialise hits

G4int i(0);

for (i=0; i<100; i++) {

BeamTestEmCalorimeterHit* aHit = new BeamTestEmCalorimeterHit(i);

fHitsCollection->insert(aHit);

}

----- snipped -----

G4bool BeamTestEmCalorimeter::ProcessHits(G4Step* aStep, G4TouchableHistory*)

{

// HandsOn4: Accumulating hit data

// Get energy deposited in this step

G4double depositedEnergy = aStep->GetTotalEnergyDeposit();

if (0 == depositedEnergy) return true;

// Get volume and copy number

G4StepPoint* preStepPoint = aStep->GetPreStepPoint();

G4TouchableHistory* theTouchable = (G4TouchableHistory*)(preStepPoint->GetTouchable());

G4VPhysicalVolume* thePhysical = theTouchable->GetVolume();

G4int copyNo = thePhysical->GetCopyNo();

// Get corresponding hit

BeamTestEmCalorimeterHit* aHit = (*fHitsCollection)[copyNo];

// Check to see if this is the first time the hit has been updated

if (!(aHit->GetLogicalVolume())) {

// Set volume information

aHit->SetLogicalVolume(thePhysical->GetLogicalVolume());

G4AffineTransform aTrans = theTouchable->GetHistory()->GetTopTransform();

aTrans.Invert();

aHit->SetRotation(aTrans.NetRotation());

aHit->SetPosition(aTrans.NetTranslation());

}

// Accumulate energy deposition

aHit->AddDepositedEnergy(depositedEnergy);

return true;

}

After implementing the above, check that it compiles. The sensitive detector also needs to be registered with the sensitive detector manager and attached to the CsI cell volume, as shown below.

BeamTestDetectorConstruction.cc

----- snipped -----

#include "G4Tubs.hh"

#include "G4VisAttributes.hh"

// HandsOn4: Defining sensitive detector

#include "G4SDManager.hh"

----- snipped -----

new G4PVParameterised("Cell_Physical", // Name

cellLogical, // Logical volume

calorimeterLogical, // Mother volume

kXAxis, // Axis

100, // Number of replicas

cellParam); // Parameterisation

////////////////////////////////////////////////////////////////////////

// HandsOn4: Defining sensitive detector for CsI

// Create a new BetamTestEmCalorimeter sensitive detector

G4VSensitiveDetector* detector = new BeamTestEmCalorimeter("Calorimeter");

// Get pointer to detector manager

G4SDManager* SDman = G4SDManager::GetSDMpointer();

// Register detector with manager

SDman->AddNewDetector(detector);

// Attach detector to volume defining calorimeter cells

cellLogical->SetSensitiveDetector(detector);

////////////////////////////////////////////////////////////////////////

After implementing the above, check that the program compiles.

User Defined Event Action Class

We can use a user action event class to access the hit data accumulated over a single event. The example includes a fully implemented class called BeamTestEventAction. This class inherits from G4UserEventAction. In the EndOfEventAction(const G4Event* event) method, the hit collection created above is accessed. The total energy deposited over all cells is summed and printed out.

We still need to register BeamTestEventAction with the run manager. The implementation is shown below.

beamTest.cc

----- snipped -----

#include "BeamTestDetectorConstruction.hh"

// HandsOn4: User defined event action

#include "BeamTestEventAction.hh"

----- snipped -----

// User action classes

runManager->SetUserAction(new BeamTestPrimaryGeneratorAction());

// HandsOn4: User defined event action

runManager->SetUserAction(new BeamTestEventAction);

After implementing the above, compile, link and run the program. Check that the total energy deposited in the calorimeter is printed out for each event as shown below.

Printout showing total energy deposited in the calorimeter

Voxelisation: top memory users:

Percent Memory Heads Nodes Pointers Total CPU Volume

------- -------- ------ ------ -------- ---------- ----------

55.48 0k 1 19 21 0.00 Calorimeter_Logical

44.52 0k 3 9 32 0.00 World_Logical

Start Run processing.

Energy deposited in calorimeter 0.963627 MeV

HepRepFile writing to G4Data1.heprep